Hinsitsu Auto Parts Sdn Bhd
10, Jalan Selat Selatan 4,
Landpac Industrial Park,
Pandamaran,
42000 Port Klang,
Selangor, Malaysia.
10, Jalan Selat Selatan 4,
Landpac Industrial Park,
Pandamaran,
42000 Port Klang,
Selangor, Malaysia.
+603-3165 2090
+603-3165 1090
+60162052150
Filter Cartridge for Particulate Removal - FO Series
| Previous | 16 / 16 | Next |
Velcon FO Series features high efficiency particulate media and a long service life. FO Series cartridges extend coalescer life and protect critical equipment downstream.
Features Include:
• EI 1590 Qualified Filter Cartridges
• Large Surface Area – Allows high flow rate with low initial pressure drop and maximum contaminant holding capacity.
• Resinated Media – Maintains strength resists effects of water and heat.
• 75 PSI Collapse Strength – Heavy gauge carbon steel center tubes give safety margin against pressure surges.
• Coated Steel Components – Resist corrosion from most industrial fluids.
• Corrugated Media – More surface area ensures longer service life.
• Buna-N Gaskets – The best general gasket material available assures positive seal in most fluids.
• Thermoset Bonding Material – Durable endcap-to-media bond prevents internal bypassing
• Threaded base filter cartridges – Available for easier installation.
• These are also available in screw-base design
Applications:
Velcon Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids. Recommended for applications where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.
Suitable for:
• Jet Fuel
• All Hydrocarbon Fuels
• Cutting Oils
• Glycols
• Degreasing Fluids
• Water Emulsion Coolants
• Naphtha
• Lube Oils
• Ethyl Alcohol
• Insulating Oils
• Toluene
• Synthetic Oils
• Hydraulic Oils
• Diesel Fuel
• Biodiesel Fuel
Specifications:
• Recommended changeout differential pressure - 25 psid
• 75 psi Collapse strength
• Micron ratings from 1/2 to 75
• 98%+ Nominal filtration efficiency
• 5 - 9 Operating pH range
• 250°F Maximum operating temperature
• Multi-pass (Beta Ratio) data available on request
• For information about Flow Ratings with various viscosity fluids, refer to Form #1532
• Flow rate depends on the fluid
Features Include:
• EI 1590 Qualified Filter Cartridges
• Large Surface Area – Allows high flow rate with low initial pressure drop and maximum contaminant holding capacity.
• Resinated Media – Maintains strength resists effects of water and heat.
• 75 PSI Collapse Strength – Heavy gauge carbon steel center tubes give safety margin against pressure surges.
• Coated Steel Components – Resist corrosion from most industrial fluids.
• Corrugated Media – More surface area ensures longer service life.
• Buna-N Gaskets – The best general gasket material available assures positive seal in most fluids.
• Thermoset Bonding Material – Durable endcap-to-media bond prevents internal bypassing
• Threaded base filter cartridges – Available for easier installation.
• These are also available in screw-base design
Applications:
Velcon Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids. Recommended for applications where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.
Suitable for:
• Jet Fuel
• All Hydrocarbon Fuels
• Cutting Oils
• Glycols
• Degreasing Fluids
• Water Emulsion Coolants
• Naphtha
• Lube Oils
• Ethyl Alcohol
• Insulating Oils
• Toluene
• Synthetic Oils
• Hydraulic Oils
• Diesel Fuel
• Biodiesel Fuel
Specifications:
• Recommended changeout differential pressure - 25 psid
• 75 psi Collapse strength
• Micron ratings from 1/2 to 75
• 98%+ Nominal filtration efficiency
• 5 - 9 Operating pH range
• 250°F Maximum operating temperature
• Multi-pass (Beta Ratio) data available on request
• For information about Flow Ratings with various viscosity fluids, refer to Form #1532
• Flow rate depends on the fluid
| Performance Characteristics | |
|---|---|
| Maximum Operating Temperature (F) | 250, 200 |
| Maximum Operating Temperature (C) | 121, 93 |
| Filter Type | Particulate |
| Application | Aviation Fuels/Industrial, Natural Gas, Ethanol |
| pH Range (Continuous Operation) | 5 - 9 |
| Brand | Velcon |
| Flow Rate | Depends on fluid viscosity and application. See brochure for more information. |